Sharp Roku TV Black Screen (Troubleshooting and Fixes)

Last Updated: July 12, 2024
Published by Ruby Cobb

Experiencing a black screen on your Sharp Roku TV can be remarkably frustrating, especially during your favorite show. Black screens typically mean that your TV is still on, but something went wrong with either the display or internal settings.

Fortunately, Sharp Roku TVs have several fixes worth trying out:

  • Power cycle your TV.
  • Reset your Roku Unit.
  • Clear your TV’s Cache.

By following these steps, you stand a good chance of getting your Sharp Roku TV back to normal functionality.

Sharp Roku TV Black Screen Errors Explained

What’s Behind The Problem?

Encountering a black screen on your Sharp Roku TV can be frustrating. This issue typically means that the TV powers on, but you can’t see any picture. Here’s a breakdown of what might cause this problem and what you might need to consider.

Possible Causes:

  • Power Issues: Your TV might not be receiving adequate power.
  • Firmware Glitches: Sometimes software bugs can lead to a black screen.
  • Hardware Problems: Damaged internal components might be responsible.
  • Loose Connections: Cables might not be connected properly.

Symptoms:

  • Black Screen with Sound: You can hear audio, but there is no picture.
  • Flashing Red Light: A sign that the TV is on, but the screen remains black.
  • No Response from Remote: The TV does not respond to input commands.

Things to Check:

  • Power Source: Ensure your TV is plugged into a working outlet.
  • Cable Connections: Make sure all cables are securely connected.
  • Remote Control: Replace batteries and try using a different remote if available.

Steps to Diagnose:

  1. Power Cycle:Unplug the TV for 30 seconds and plug it back in.
  2. Reset TV:Use the remote to reset the TV settings by pressing specific button sequences.
  3. Check Display Settings:Adjust the brightness and contrast settings.

By identifying these aspects, you can start troubleshooting your Sharp Roku TV’s black screen problem.

Common Causes and Diagnostics

When your Sharp Roku TV displays a black screen, several common causes might be to blame. Understanding these issues can help you diagnose and potentially fix the problem.

Faulty Connections

Loose HDMI Cable

Faulty connections are a frequent cause of black screens. Check all cable connections from the TV to any connected devices.

Ensure HDMI cables are secure and properly inserted. Loose or damaged cables can interrupt the signal.

Inspect power cords for wear and tear. A frayed or damaged power cord might not deliver enough power to the TV, leading to a black screen.

Also, try connecting the TV to a different power outlet to rule out issues with the current one.

Power Supply Problems

Power supply problems can also cause a blank screen. The TV’s internal power supply might be faulty.

Look for the standby light on the TV. If it’s off, the TV isn’t receiving power. In some cases, a simple power cycle can resolve the issue.

Turn off the TV, unplug it, wait a few minutes, then plug it back in and turn it on.

This can reset the power supply and solve minor issues.

Software Glitches

Software glitches are another common culprit. Your Roku TV’s firmware might need an update or reset. Software bugs can make the screen go black, and updating or resetting often fixes these problems.

To reset the TV, you can use the remote. Press the Home button five times, the Up arrow once, Rewind twice, and Fast-forward twice.

This clears the TV cache and resets settings. Alternatively, navigate to Settings > System > Advanced system settings > Factory reset, then follow the prompts.

Step-by-Step Troubleshooting Guide

When your Sharp Roku TV screen goes black, several steps can help resolve the issue. These methods include checking cable connections, power cycling the TV, and performing a factory reset.

Checking Cable Connections

First, ensure that all cable connections are secure. Sometimes a loose or unplugged power cable can cause the screen to go black.

Inspect the power cord to confirm that it is firmly plugged into both the TV and the wall outlet. Next, check that the outlet is working correctly. You can test this by plugging in another device first to gauge if the power flow is consistent.

Additionally, verify that any HDMI or other connection cables are connected both to the TV and the external devices, as loose cables may cause display issues.

After confirming the connections, try turning on your TV again. If the screen remains black, proceed to the next troubleshooting step.

Power Cycling the TV

Power Cycle Your TV

Power cycling can help fix various issues, including a black screen. To power cycle your Sharp Roku TV, follow these steps:

  1. Unplug the TV from the power outlet.
  2. Press and hold the power button on the TV for 30 seconds. This helps discharge any residual power.
  3. Plug the TV back into the power outlet.

Wait a few moments for the TV to reboot. This process can clear minor glitches and refresh the TV’s system.

If the screen is still black after power cycling, you may need to perform a factory reset.

Factory Reset Procedures

A factory reset can restore your TV to its original settings and resolve the black screen issue. There are two methods to perform a factory reset on a Sharp Roku TV:

Using the Remote Control:

  1. Press the Home button on the remote.
  2. Navigate to Settings > System > Advanced system settings > Factory reset.
  3. Follow the on-screen instructions to complete the reset.

Using the TV’s Reset Button:

  1. Locate the RESET button on the back or bottom of the TV.
  2. Use a paperclip or similar object to press and hold the RESET button for about 15 seconds.
  3. Release the button when the TV restarts.

Both methods will erase all settings and data, returning the TV to its factory state. This step should be used as a last resort if other troubleshooting methods fail.

Professional Repair and Support

For issues with your Sharp Roku TV, it’s crucial to reach out to professional repair services or customer support. This ensures that technical problems are addressed accurately and safely.

Contacting Sharp Customer Service

You can address black screen problems by contacting Sharp Customer Service. Start by visiting the official Sharp website.

Locate the Support section to find the customer service number and relevant contact details. Before calling, make sure to have your TV’s model number and receipt ready. 

Once connected, explain the issue in detail. The representative may guide you through troubleshooting steps or schedule a technician visit. In some cases, your TV might still be under warranty, potentially covering repair costs.

Ruby Cobb
Ruby has a passion for all things tech. Whether that be building computers, setting up a network, or wiring a home theater. Ruby is an avid gamer, writer, and researcher. When she's not writing articles for Rocky MTN Ruby she enjoys hiking, binge watching TV shows, and playing with her German Shorthaired Pointer.
Rocky MTN Ruby covers Computer Hardware, Components, Peripherals, Coding Languages, Gaming, and so much more.
Copyright © Rocky MTN Ruby 2021
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram